Rethink about a neutral density filter on your camera!

Are you a professional cameraman? Must be familiar with a neutral density filter! Or maybe you have to use it as your camera for this outfit? For the professional, this camera outfit is very much appreciated its existence, but not by amateurs. Filter is more familiarly called ND filters are usually not appreciated its existence, because of the impact generated by the filter is not as splashy and flashy as the other filters. ND filter does not give effect to the stars, shades or many other striking effects like another outfit, but why the professionals are fond of this filter? Here we will discuss it further.

The main core of the Neutral Density (ND) filter is to reduce the amount of light that will enter into the sensors / film. With the decreasing amount of light available, the exposure time will be made much longer than the default settings.

Neutral Density Filter is composed of various types, usually referred to as the exposure and the following factors among others:
● 2x one stop
● 4x two stops
● 8x three stops
● 64x six stops
● 1024x ten stops (Lee Big Stopper region)

It’s easy, you just need to pair the camera lens filter holder, and the camera will work automatically adjust the ND filter is used. For example, you use the 8x three stops of exposure factors, the camera will reduce the shutter speed of, could say, 1/125sec to 1/15sec to compensate for the additional three stop light is needed. Or aperture to be opened up from f/22 to f / 8

Have you ever seen pictures that form waterfalls as the water is smooth cotton?

If so, maybe ND filters to smooth secret image. If you are in a very sunny location, shutter speed ranges from 1/125 sec, but ideally you only need 1/15 second or even slower again. This is where the ND filter can be used to get the effect you envisioned.

You find it difficult to capture the best place you can see as many tourists are milling around?

With ND Filter you can handle it. You can make the shadow of the tourists are blurred even invisible at all. So, you ready to capture the perfect landscape with the building?

Due to light conditions, sometimes you can not concentrate on one thing to focus the image. For example, when you want to take pictures of flowers which are grow behind many of the same flower. You can make things behind the blur by adjusting the incoming light using a ND filter. In short, with ND Filter, you can get the effect of a satisfactory depth of field. In addition, the ND Filter to set the flash of light that you will use.

Leave a Reply

Your email address will not be published. Required fields are marked *